145.A.75 In accordance with the exposition, the organisation shall be entitled to carry out the following tasks: 145.A.75(a) Scope of work (a) Maintain any aircraft and/or component for which it is approved at the locations identified in the approval certificate and in the exposition; 145.A.75(b) Limited scope of work (b)…

145.A.70 145.A.70(a) MOE (a) ‘Maintenance organisation exposition’ means the document or documents that contain the material specifying the scope of work deemed to constitute approval and showing how the organisation intends to comply with this Annex (Part-145). The organisation shall provide the competent authority with a maintenance organisation exposition, containing…

145.A.65 145.A.65(a) Policies (a) The organisation shall establish a safety and quality policy for the organisation to be included in the exposition under point 145.A.70. AMC 145.A.65(a) Safety and quality policy The safety and quality policy should as a minimum include a statement committing the organisation to: — Recognise safety…

145.A.60 145.A.60(a) Reporting to competent authority (a) The organisation shall report to the competent authority, the state of registry and the organisation responsible for the design of the aircraft or component any condition of the aircraft or component identified by the organisation that has resulted or may result in an…

145.A.55 145.A.55(a) Maintenance and airworthiness review records (a) The organisation shall record all details of maintenance work carried out. As a minimum, the organisation shall retain records necessary to prove that all requirements have been met for the issue of the certificate of release to service, including subcontractor’s release documents,…

145.A.50 145.A.50(a) Certificate of release to service (CRS) (a) A certificate of release to service shall be issued by appropriately authorised certifying staff on behalf of the organisation when it has been verified that all maintenance ordered has been properly carried out by the organisation in accordance with the procedures…

145.A.48 The organisation shall establish procedures to ensure that: 145.A.48(a) Verification after maintenance (a) after completion of maintenance a general verification is carried out to ensure that the aircraft or component is clear of all tools, equipment and any extraneous parts or material, and that all access panels removed have…

145.A.47 145.A.47(a) Production planning (a) The organisation shall have a system appropriate to the amount and complexity of work to plan the availability of all necessary personnel, tools, equipment, material, maintenance data and facilities in order to ensure the safe completion of the maintenance work. AMC 145.A.47(a) Procedures 1. Depending…

145.A.45 145.A.45(a) Availability (a) The organisation shall hold and use applicable current maintenance data in the performance of maintenance, including modifications and repairs. ‘Applicable’ means relevant to any aircraft, component or process specified in the organisation’s approval class rating schedule and in any associated capability list. In the case of…

145.A.42 145.A.42(a) Classification of components (a) Classification of components. All components shall be classified into the following categories: (i) Components which are in a satisfactory condition, released on an EASA Form 1 or equivalent and marked in accordance with Subpart Q of Annex I (Part 21) to Regulation (EU) No…